Important Information
You are visiting the international Vantage Markets website, distinct from the website operated by Vantage Global Prime LLP
( www.vantagemarkets.co.uk ) which is regulated by the Financial Conduct Authority ("FCA").
This website is managed by Vantage Markets' international entities, and it's important to emphasise that they are not subject to regulation by the FCA in the UK. Therefore, you must understand that you will not have the FCA’s protection when investing through this website – for example:
- You will not be guaranteed Negative Balance Protection
- You will not be protected by FCA’s leverage restrictions
- You will not have the right to settle disputes via the Financial Ombudsman Service (FOS)
- You will not be protected by Financial Services Compensation Scheme (FSCS)
- Any monies deposited will not be afforded the protection required under the FCA Client Assets Sourcebook. The level of protection for your funds will be determined by the regulations of the relevant local regulator.
If you would like to proceed and visit this website, you acknowledge and confirm the following:
- 1.The website is owned by Vantage Markets' international entities and not by Vantage Global Prime LLP, which is regulated by the FCA.
- 2.Vantage Global Limited, or any of the Vantage Markets international entities, are neither based in the UK nor licensed by the FCA.
- 3.You are accessing the website at your own initiative and have not been solicited by Vantage Global Limited in any way.
- 4.Investing through this website does not grant you the protections provided by the FCA.
- 5.Should you choose to invest through this website or with any of the international Vantage Markets entities, you will be subject to the rules and regulations of the relevant international regulatory authorities, not the FCA.
Vantage wants to make it clear that we are duly licensed and authorised to offer the services and financial derivative products listed on our website. Individuals accessing this website and registering a trading account do so entirely of their own volition and without prior solicitation.
By confirming your decision to proceed with entering the website, you hereby affirm that this decision was solely initiated by you, and no solicitation has been made by any Vantage entity.
I confirm my intention to proceed and enter this website Please direct me to the website operated by Vantage Global Prime LLP regulated by the FCA in the United KingdomImportant Information
By providing your email and proceeding to create an account on this website, you acknowledge that you will be opening an account with Vantage Global Limited, regulated by the Vanuatu Financial Services Commission (VFSC), and not the UK Financial Conduct Authority (FCA).
-
Please enter a valid email address
-
Please tick the checkbox to proceed
-
Please tick the checkbox to proceed
Please tick all to proceed
Access Restricted
Your access to this website is restricted.
Our website and services are not available to, and are not intended for, individuals who are citizens or residents of the United States, or entities incorporated in or conducting business within the United States.
If this does not apply to you and you believe you have received this message in error, please contact us at support@vantagemarkets.com for further assistance.
If you fall into any of the above categories, please exit the site.
Important Information
Thank you for visiting the Vantage Markets website. Please note that this website is intended for individuals residing in jurisdictions where accessing it is permitted by Vantage and its affiliated entities do not operate in your home jurisdiction.
By clicking 'I CONFIRM MY INTENTION TO PROCEED AND ENTER THIS WEBSITE', you confirm that you are entering this website solely based on your initiative and not as a result of any specific marketing outreach. You wish to obtain information from this website based on reverse solicitation principles, in accordance with the applicable laws of your home jurisdiction.
I CONFIRM MY INTENTION TO PROCEED AND ENTER THIS WEBSITE-
Search query too short. Please enter a full word or phrase.
Keywords
Popular Search
Spread Trading Guide: What a Spread Is, How It Works, and Why It Matters
Open any trading platform and each instrument shows two prices side by side. The lower one is where you can sell, the higher one is where you can buy, and the distance between them is the spread. It’s one of the most basic ideas in trading, yet it shapes the cost of nearly every position you open.
This guide brings together everything you need to know about spreads when trading Contracts for Difference (CFDs): what the bid ask spread is, how it’s quoted in pips and points, how to put a money value on it, why it changes through the day, how it differs across forex, indices, commodities, shares, and cryptocurrencies, and more.
Disclaimer: This article is for educational purposes only and is not intended as investment or trading advice. Any examples provided are hypothetical and for illustrative purposes only. They do not reflect actual trading results or client experiences.
Key Points
- A spread is the difference between the buy (ask) price and the sell (bid) price of an instrument, and on most CFD trades, it’s the cost built into each round trip (opening and closing a position).
- The money value of a spread depends on three things: how wide it is, what one pip or point is worth, and how large your position is, so the same quoted spread can mean very different costs.
- Spreads are not constant; liquidity, volatility, scheduled news, trading sessions, and the asset class all influence how wide they are at any moment.
- Comparing trading costs fairly means looking beyond the spread to other fees and charges such as commissions, overnight funding, and execution. It also involves comparing typical spreads rather than solely focusing on the lowest advertised figure.
What Is a Spread in Trading?
In trading, the spread is the gap between two prices quoted at the same moment.
The bid is the highest price that buyers are currently prepared to pay. Meanwhile, the ask (sometimes called the offer) is the lowest price that sellers are currently prepared to accept [1][2]. The difference between the two is known as the bid-ask spread.
When you trade a CFD, your provider streams both prices to your platform. A buy position opens at the ask and is closed at the bid. A sell position opens at the bid and is closed at the ask. As you always enter on one side of the quote and exit on the other, the spread is built into the round trip.
For a shorter definition, see the spread entry in our glossary. This guide goes further, covering how spreads are measured and compared across markets.
Why Does a Spread Exist?
Someone has to stand ready to buy from sellers and sell to buyers. Market makers, banks, and other liquidity providers quote both prices and carry the risk that the market moves while they hold a position. The spread compensates them for providing that service and for taking on that risk.
The width of the spread also tells you something about the market itself. FINRA, the self-regulatory organisation for US broker-dealers, explains that less liquid investments often have a wide bid ask spread, while a narrow spread can indicate good liquidity (though it does not give a complete picture on its own) [1].
Spread Trading Can Mean More Than One Thing
The phrase “spread trading” is also used for strategies that combine two related positions, such as buying one futures contract month and selling another, where the trader is focused on the change in the price difference between the two legs [3]. Options traders use ‘spreads’ in a similar way, too.
This guide covers the more common everyday meaning: the bid-ask spread you see on every quote.
How Spreads Are Quoted: Pips, Points, and Percentages

Different markets express the spread in different units, so it helps to know what you are looking at before comparing figures.
- Pips in Forex: For most currency pairs, one pip is a move in the fourth decimal place (0.0001). For pairs that include the Japanese yen, one pip is a move in the second decimal place (0.01).
- Fractional Pips: Many platforms show an extra digit, so EUR/USD might be quoted to five decimal places. The last digit is a tenth of a pip, sometimes called a pipette, which lets spreads such as 1.2 pips be displayed.
- Points: Outside forex, the spread on index, commodity, and share CFDs is normally expressed in points or directly in the instrument’s pricing currency. On an index CFD, a spread of 1.0 tells you that buyers pay one index point more than sellers receive.
- Percentages: Some traders express the spread as a share of the price [(ask price – bid price) divided by ask price], multiplied by 100. This makes it easier to compare instruments that trade at very different price levels.
| Instrument | Sell Price (Bid) | Buy Price (Ask) | Spread |
| EUR/USD (forex CFD) | 1.08500 | 1.08512 | 1.2 pips (a pip is the fourth decimal place) |
| USD/JPY (forex CFD) | 149.995 | 150.015 | 2.0 pips (a pip is the second decimal place) |
| Index CFD | 5,000.5 | 5,001.5 | 1.0 point |
Table 1: Reading the spread on three hypothetical quotes
How to Calculate the Cost of a Spread
A spread only becomes meaningful when you turn it into money. The general formula is:
Cost of the spread = spread width (pips or points) x money value per pip or point x position size (lots or contracts)
For a currency pair quoted in US dollars, such as EUR/USD, 1 pip on a position of 100,000 units is worth $10 (0.0001 x 100,000). Smaller positions scale down in proportion.
Using the hypothetical EUR/USD spread of 1.2 pips from Table 1:
| Position Size | Value of One Pip | Spread Cost per Round Trip |
| 1 standard lot (100,000 units) | $10.00 | 1.2 x $10.00 = $12.00 |
| 1 mini lot (10,000 units) | $1.00 | 1.2 x $1.00 = $1.20 |
| 1 micro lot (1,000 units) | $0.10 | 1.2 x $0.10 = $0.12 |
Table 2: Hypothetical spread cost on EUR/USD at a 1.2 pip spread for different position sizes
The same approach works for other instruments. If a hypothetical index CFD carries a spread of 1.0 point and your position is worth $5 per point, the spread costs $5 for the round trip. If the spread widens to 3.0 points, the cost rises to $15 for the same position.
The Spread Is Charged on the Full Position, Not the Margin
With leveraged CFDs, the margin you deposit covers only part of the position’s value. The spread is worked out on the whole exposure, so even a trade opened with modest margin can carry a spread cost that looks large next to the deposit. Leverage can magnify both gains and losses, and a position can lose far more than its spread cost if the market moves against you.
The Spread and Your Break-Even Point
Straight after you open a buy position, your platform will normally show a small loss equal to the spread. That’s because the position is valued at the bid, the price you would receive if you closed it immediately. The bid has to rise to your entry price before the trade breaks even, before any commission or overnight funding is counted.
For a sell position, the ask has to fall to your entry price.
3 Types of Spreads: Fixed, Variable, and Raw
Providers typically price spreads in three core ways, with each catering to different priorities.
1. Fixed Spreads
With a fixed spread, the provider commits to one gap between bid and ask that does not shift as prices tick up and down, which makes costs simpler to anticipate.
Fixed spreads are often wider than variable spreads during calm, liquid periods, and account terms may allow orders to be requoted or spreads to change in exceptional conditions, so the small print matters.
2. Variable or Floating Spreads
A variable spread, also called a floating spread, follows the prices available in the underlying market. It can be very tight when liquidity is deep and can widen considerably when liquidity thins or prices move quickly.
Many CFD providers, including Vantage Markets, quote variable spreads on most instruments.
| Factors | Fixed Spreads | Variable Spreads |
| How it is set | Held at a level chosen by the provider | Moves with the prices quoted in the underlying market |
| Cost certainty | Known before you trade in normal conditions | Changes from moment to moment |
| Quiet, liquid hours | Often wider than a variable spread at the same time | Can be very tight |
| Fast markets and news | Terms may allow requotes or changes in exceptional conditions | Can widen sharply |
| Worth checking | The account terms for exceptional market conditions | Typical spreads at the hours you trade, not only the minimum |
Table 3: A comparison of fixed spreads versus variable spreads
3. Raw Spreads and Spread-Only Accounts
Some accounts pass through prices that sit very close to the underlying market, often called raw spreads, and charge a separate commission per lot instead. Other accounts are spread-only: no commission is charged, and the provider’s charge is included in a wider spread.
Neither model is cheaper by default: What matters is the total cost of a round trip for the instrument and size you intend to trade.
| Factors | Account A: Spread Only | Account B: Raw Spread Plus Commission |
| Quoted spread | 1.2 pips | 0.2 pips |
| Spread cost (1.2 or 0.2 x $10) | $12.00 | $2.00 |
| Commission ($3 per side, opening and closing) | None | $6.00 |
| Total round trip cost | $12.00 | $8.00 |
Table 4: Hypothetical round trip cost of one standard lot of EUR/USD under the spread-only and raw spread pricing models. Figures are illustrative and do not represent any provider’s current pricing.
Vantage Markets offers both spread-only and raw spread account types:
- Our Standard STP Account is commission-free*, with costs built into the spread.
- Our Raw ECN and Pro ECN Accounts pair spreads from 0.0 pips with a commission.
You can compare them on the trading accounts page and review the commission schedule.
* Commission-free pricing excludes selected stock and ETF CFD products. Account availability and terms depend on the Vantage entity that serves you.
What Makes Spreads Widen or Tighten?
Variable spreads respond to the conditions in the underlying market. These are the main drivers:
- Liquidity: The more buyers and sellers there are, the more competition there is to quote prices closer to or at the current market price. When participation drops, spreads tend to widen. The US Securities and Exchange Commission’s investor education site notes that lower trading interest outside regular hours generally correlates with wider spreads [4].
- Volatility: When prices are moving quickly, liquidity providers tend to widen their quotes. Data from the Bank for International Settlements (BIS) shows spreads across equities, currencies, and government bonds have come down markedly over a quarter of a century, yet periods of market stress can still cause them to jump [5].
- Scheduled News: Interest rate decisions, inflation figures, and employment reports can trigger sudden moves, so spreads often widen in the moments around a release. An economic calendar shows when major announcements are due.
- Trading Sessions: Liquidity rises and falls as financial centres open and close. A BIS review of the sharp fall in sterling on 7 October 2016 gave significant weight to timing, as the move happened in early Asian trading when activity in that currency was thin [6].
- Daily Rollover: Around the daily forex cut-off, open positions are carried into the next value date and many banks rebalance. For a brief window, fewer prices are on offer and spreads often look noticeably wider.
- Weekends and Market Gaps: Most markets close at the weekend, and prices can open at a different level on Monday. Spreads are often wider when trading resumes and before liquidity returns to normal levels. Also, even though cryptocurrency markets trade around the clock, weekend liquidity can still be thinner.
- Instrument Popularity: Heavily traded instruments, such as major currency pairs and leading stock indices, usually carry tighter spreads than instruments that trade less often (think small-cap stocks with lower demand).
Spreads Across Different Markets
The principle is the same everywhere: the spread is the gap between buy and sell prices. How wide it tends to be, and what makes it change, depends on the market, too.
| Market | Typical Spread Behaviour | Common Reasons It Widens |
| Forex majors | Very high trading volume, so usually among the tightest spreads | Session changes, daily rollover, major data releases |
| Forex minors and exotics | Less traded, so spreads are generally wider; exotics can be much wider | Local holidays, thin hours, political, economic shocks |
| Index CFDs | Tend to be tightest while the underlying cash market is open | Opening and closing auctions, overnight sessions |
| Commodity CFDs (gold, oil) | Liquid during main sessions, wider in quieter hours | Inventory reports, supply news, contract rolls |
| Share CFDs | Usually linked to the spread on the underlying exchange | Earnings, trading outside exchange hours, smaller companies |
| Cryptocurrency CFDs | Often wider than other CFD types and charges can be higher | Extreme volatility, weekend trading, sudden sentiment shifts |
Table 5: General spread behaviour by asset class (no specific figures, which vary by provider, account, and time)
- Forex CFDs: Major pairs such as EUR/USD typically trade in enormous volumes, which tends to keep spreads narrow. Meanwhile, exotic pairs (i.e., a major currency is paired with one from a smaller or emerging economy) are usually traded far less and carry wider spreads. Our forex spread explainer looks at currency pairs in more detail.
- Index CFDs: Spreads are typically tightest while the underlying cash market is open and can widen during overnight or pre-market hours.
- Commodity CFDs: Gold and oil are widely traded, but spreads can widen around inventory data, supply news, and quieter sessions.
- Share CFDs: The spread on a share CFD is usually linked to the spread on the exchange where the share is listed, so smaller or less traded companies tend to have wider spreads, as do quotes outside regular exchange hours [4].
- Cryptocurrency CFDs: In 2017, the UK Financial Conduct Authority (FCA) warned that the value of cryptocurrencies, and so the value of CFDs linked to them, is extremely volatile, and that charges, including the spread, tend to be significantly higher than for other CFD products [7].
Why Spreads Matter
Here are a few key reasons why the spread deserves attention:
- It’s Paid on Winning and Losing Trades: The spread is paid, regardless of the trading outcome. FINRA notes that a wide bid-ask spread can eat into returns by raising the price you pay to enter and lowering the price you receive to exit [1].
- It Sets the Distance to Break Even: Every new position starts behind the market by the width of the spread, so the price has to move in your favour by at least that amount before the trade covers it.
- It Adds Up Over Many Trades: One spread looks small, but it is paid again on every round trip. The more often you trade, the more your total trading costs grow.
- It Reflects Market Conditions: A sudden widening can signal thinner liquidity or rising volatility, which may also affect how orders are filled.
How Trading Frequency Changes the Total
Using the hypothetical mini lot of EUR/USD from Table 2, with a 1.2 pip spread costing $1.20 per round trip:
| Trades Placed | Calculation | Total Spread Cost |
| 5 round trips | 5 x $1.20 | $6.00 |
| 40 round trips | 40 x $1.20 | $48.00 |
| 200 round trips | 200 x $1.20 | $240.00 |
Table 6: Hypothetical cumulative spread cost on one mini lot of EUR/USD at a constant 1.2 pip spread
Short-Term and Longer-Term Trading
The spread weighs differently depending on how long positions are held and how far the price is expected to move:
- Day Trading and Other Short-Term Trading Styles: Traders who open and close several positions in a day pay the spread many times, often while aiming for relatively small price moves. As such, the spread can take up a large share of each move. FINRA notes that frequent trading can lead to higher costs that eat into returns [8]. Our day trading guide covers intraday costs in more detail.
- Swing and Position Trading: Holding a trade for several days or weeks means the spread is incurred once per round trip (across entry and exit), and it is often smaller relative to the price move the trader is targeting. The cost that builds up instead is overnight funding, which the FCA says can become substantial for CFD positions kept open over longer periods [9].
How Spreads Integrate With Other Trading Costs
Looking at spreads alone can understate what a CFD trade really costs.
When the FCA reviewed CFD providers, it observed that value assessments often centred on spread comparisons, while commissions and overnight funding could also account for a meaningful part of the total trading costs incurred [9].
Here’s a quick overview on the common types of trading costs:
- Commission: A fixed or per-lot fee charged on accounts that use raw or near-raw spreads. Add it to the spread for a full round-trip comparison.
- Overnight Funding (Swap): Positions held open past the daily cut-off are usually charged or credited a financing adjustment. The rates vary by instrument and direction; Vantage lists them on its swap rates page.
- Slippage: Slippage is the difference between the price you expected and the price at which your order is actually filled. The SEC explained that the price at which a market order is filled is not guaranteed and often differs from the last traded price or real time quote, depending on the liquidity available at that moment [10]. See Vantage’s slippage definition for more details.
- Currency Conversion: If an instrument is priced in a different currency from your account, gains, losses, and costs are converted to your account base currency, which can add a further small cost depending on the provider’s terms.
How to Compare Spreads Between Providers: 5 Tips For Every Trader
Headline spread figures are useful, but they rarely tell the whole story. Instead, these five tips are designed to help you cover all your bases when comparing spreads between different providers:
- Typical Versus Minimum: Advertised spreads are often shown as ‘from’ figures, which reflect the lowest level reached. The average or typical spread at the times you trade is more relevant.
- Same Instrument, Same Unit: Compare like with like: the same instrument, the same position size, and the same unit (e.g., pips, points).
- Total Round Trip Cost: Add any commission to the spread, as in Table 4, and consider overnight funding if you hold positions for longer.
- Market Conditions Around Certain Events: Look at how spreads behave around major announcements and outside main sessions, not only during quiet, liquid periods.
- Execution and Terms: Check how orders are filled, how requotes are handled on fixed spread accounts, and what the terms say about exceptional market conditions.
Vantage publishes its pricing information on the trading spreads page, where you can review spreads by instrument and account type.
6 Practical Ways to Keep Spread Costs in View
Spreads cannot be avoided, but they can be understood and planned for. Here are some approaches that you can consider:
- Check the Live Spread Before Placing an Order: Platforms such as MetaTrader 4 (MT4) and MetaTrader 5 (MT5) can display the bid, the ask, and the current spread in the market watch window.
- Be Aware of the Clock: Spreads are often tighter when the main markets for an instrument are open and liquidity is deep, and wider in quieter hours or around session changes.
- Plan Around Major Announcements: If you intend to have orders working near a scheduled release, allow for the possibility of wider spreads and slippage.
- Know the Contract Specifications: Look up the contract size, the money value of each pip or point, and any commission. Together, these factors turn a quoted spread into an actual cost.
- Consider Order Types: A limit order lets you set the price you are willing to accept, although FINRA notes that it does not guarantee execution [1].
- Practise With Virtual Funds: A demo account lets you watch how spreads behave across sessions and instruments without using real funds. Demo spreads and fills may differ from a live account.
5 Common Misconceptions About Spreads
Instead of falling into the common pitfalls associated with spreads, here’s what to look out for:
- “Zero Spread Means Free Trading”: Accounts advertising spreads from 0.0 pips usually charge a commission, and overnight funding still applies to positions held past the daily cut-off.
- “The Advertised Spread Is What I Will Pay”: ‘From’ figures typically show the lowest spread reached. Variable spreads can widen at the time of trade.
- “Fixed Spreads Never Change”: Fixed spreads stay constant in normal conditions, but account terms may allow changes or requotes in exceptional markets.
- “Spreads Only Matter to Very Active Traders”: Frequent traders feel the spread most, but every trader pays it on every round trip, and larger positions pay proportionally more.
- “A Tight Spread Means the Market Is Calm”: A narrow spread usually reflects good liquidity, but FINRA cautions that it does not provide a complete picture on its own [1]. Prices can still move sharply due to other factors.
Making Sense of Spreads in Every Trade
The spread is the starting cost of almost every CFD position. Knowing how to read it, convert it into money, and factor it in with other related fees like commissions, overnight funding, and slippage can give you a clearer view of what a trade really costs before you place it.
In addition, spreads vary with liquidity, volatility, the time of day, and the market you trade. So, the figure on your screen is always worth a second look. As CFDs are leveraged products, losses can exceed the cost of the spread many times over if the market moves against you.
Frequently Asked Questions About Spreads
Here are answers to some of the most common questions about spreads in trading.
What Is a Spread in Trading?
A spread in trading is the gap between an instrument’s ask, the higher price where buy orders fill, and its bid, the lower price where sell orders fill, measured at the same instant. Since a CFD position is opened on one side and closed on the other, that gap forms part of the cost of every completed trade.
How Do You Calculate a Spread?
Subtract the bid from the ask to find the spread in price terms, then convert it into pips or points. To find the cost, multiply the spread by the value of one pip or point and by your position size. For example, a hypothetical 1.2 pip spread on one standard lot of EUR/USD, where one pip is worth $10, costs $12 per round trip.
What Is a Good Spread?
There is no single figure because a reasonable spread depends on factors such as the instrument that’s being traded, the time of day, and prevailing market conditions. Major forex pairs typically have narrower spreads than exotic pairs, shares of smaller companies, or cryptocurrency CFDs. Compare the typical spread for the same instrument and the total round trip cost, including any commission.
Why Do Spreads Widen?
Spreads usually widen when liquidity falls or volatility rises. Common triggers include major economic announcements, the daily rollover in forex, the weekend reopening, quieter trading sessions, and unexpected news.
Is a Lower Spread Always Better?
A lower spread reduces one cost, but it is not the full picture. Some accounts combine very narrow spreads with a commission, positions held overnight attract funding charges, and execution quality affects the price you actually receive. Comparing the total cost for your own trading activity gives a more accurate view.
What Is the Difference Between a Spread and a Commission?
The spread is built into the quoted prices and is paid through the gap between buying and selling. A commission is a separate, visible fee charged per trade or per lot. Some accounts use only the spread, while others combine a narrower spread with a commission.
Do Spreads Apply When You Close a Trade?
The spread is effectively paid once per round trip. You enter on one side of the quote and exit on the other, so the cost is spread across opening and closing, rather than being charged in full on each side.
RISK WARNING: CFDs are complex financial instruments and carry a high risk of losing money rapidly due to leverage. You should ensure you fully understand the risks involved and carefully consider whether you can afford to take the high risk of losing your money before trading.
Disclaimer: The information is provided for educational purposes only and doesn’t take into account your personal objectives, financial circumstances, or needs. It does not constitute investment advice. We encourage you to seek independent advice if necessary. The information has not been prepared in accordance with legal requirements designed to promote the independence of investment research. No representation or warranty is given as to the accuracy or completeness of any information contained within. This material may contain historical or past performance figures and should not be relied on. Furthermore estimates, forward-looking statements, and forecasts cannot be guaranteed. The information on this site and the products and services offered are not intended for distribution to any person in any country or jurisdiction where such distribution or use would be contrary to local law or regulation.
References
- “Understanding Market Liquidity and Your Investments – FINRA” https://www.finra.org/investors/insights/market-liquidity-risk. Accessed on 1 October 2026.
- “Glossary: Bid-Ask Spread – Investor.gov” https://www.investor.gov/introduction-investing/investing-basics/glossary/bid-ask-spread. Accessed on 1 October 2026.
- “Futures Spread Overview – CME Group” https://www.cmegroup.com/education/courses/understanding-futures-spreads/futures-spread-overview. Accessed on 1 October 2026.
- “Extended-Hours Trading: Investor Bulletin – Investor.gov” https://www.investor.gov/introduction-investing/general-resources/news-alerts/alerts-bulletins/investor-bulletins-42. Accessed on 1 October 2026.
- “Through stormy seas: how fragile is liquidity across asset classes and time? – Bank for International Settlements” https://www.bis.org/publ/work1229.pdf. Accessed on 1 October 2026.
- “The sterling ‘flash event’ of 7 October 2016 – Bank for International Settlements” https://www.bis.org/publ/mktc09.htm. Accessed on 1 October 2026.
- “Consumer warning about the risks of investing in cryptocurrency CFDs – Financial Conduct Authority” https://www.fca.org.uk/news/news-stories/consumer-warning-about-risks-investing-cryptocurrency-cfds. Accessed on 1 October 2026.
- “Frequent Intraday Trading: Understanding the Basics – FINRA” https://www.finra.org/investors/insights/frequent-intraday-trading. Accessed on 1 October 2026.
- “Multi-firm review of contracts for difference providers’ provision of price and value – Financial Conduct Authority” https://www.fca.org.uk/publications/multi-firm-reviews/contracts-difference-providers-provision-price-and-value. Accessed on 1 October 2026.
- “Investor Bulletin: Understanding Order Types – Investor.gov” https://www.investor.gov/introduction-investing/general-resources/news-alerts/alerts-bulletins/investor-bulletins-14. Accessed on 1 October 2026.
Latest Academy Articles
Market News Tags
- # Asian Market News Today
- # Crude Oil News Today
- # Earnings News Today
- # Economic News Today
- # Featured News
- # Federal Reserve News
- # Commodity Market News
- # Interest Rate News
- # Financial News
- # Forex News Today
- # Gold News Today
- # Market News Today
Related Articles
- Gold Trading Hours: When Does the Gold Market Open in Peru?
- Gold Trading Hours: When Does the Gold Market Open in Chile?
- Gold Trading Hours: When Does the Gold Market Open in Argentina?
- Gold Trading Hours: When Does the Gold Market Open in Mexico?
- 20 Chart Patterns: How They Form and How to Read Them
- What Is Trading Psychology? 5 Habits & 5 Pitfalls (Free PDF)
- What Moves Synthetic Indices? Unpacking Their Algorithmic Nature
- Best Copy Trading Apps and Platforms in Mexico: 8 Compared